Properties: perAcetic Acid 5% has a high oxidation potential and is very reactive .It exhibits excellent bactericidal and fungicidal activity against a wide range of microorganism in cold or warm water .in most cases potable water rinsing is not required .It biodegradable to oxygen ,water and acetic acid. Broad spectrum efficacy (gram+ and gramâââ‰â¬Å organisms and spores)
Chemical Composition: perAcetic Acid 5% is an equilibrium mixture of per acetic acid, acetic acid, hydrogen peroxide, proprietary ingredients and water.
Specifications:
Appearance : Clear, colorless liquid having pungent-vinegar like odor
Per acetic acid (% wt.) : Min.5.0 %
Active Oxygen (%) : 9%
H2O2 (% wt) : 21-24 %
Acetic acid (%wt) : 12%
Gram per ml at 25oC : 1.12-1.13
pH 1% sol : 1.5-3.5
Solubility : 100 % in water
Safety and Handling: The perAcetic Acid 5% Container must be store in an upright position .shaded from sunlight as well as protected from source of radiant heat. Contamination of the product, especially from heavy metal ions and alkali, must be avoided. Avoid contact with eyes and skin; avoid breathing vapor, if contact occurs, flush with plenty of water. If discomfort persists, seek medical attention. Do not take internally, Safety bears like gloves, goggle and mask must be used during handling perAcetic Acid 5%
Shelf-life: Six months from the date of mfg without losses of active oxygen, if stored properly.
Packaging: 25 kg HDPE jerry can with vent cap.
Sanitation Benefit:
- Disperses/ Penetrate bio film
- Kill bacteria, mold, fungus and yeast
- Very fast acting
- Will not oxidize stainless steel or contribute to chloride stress cracking
- Biodegradable
- Neutralize alkali material and clean mineral scale.
- No rinse required.
- Does not add conductivity
- Non persistent in environment
- Breaks down into CO2 and water.
perAcetic Acid 5% for CIP:
- Effective and stable at pH 1 to 9
- Non- foaming, very low surface tension
- Does not contribute taste and odor
- No rinse required
- Complete solubility in water
- Will not corrode stainless steel and aluminum